Double Thick Nylon & Leather CollarTag™ Sizes for collar widths 3/8, 5/8, 3/4 and 1″

NOTE: This is not the correct CollarTag™ for Adjustable Length Collars, i.e., collars that close with a snap or clasp.
Order Adjustable Length Collar CollarTags™ here.

Made of Non-magnetic Stainless Steel and bent so they can be slid onto double thick nylon or leather collars without binding.

Available for collars 3/8, 5/8, 3/4 or 1″ wide & 3/16″ to 1/4″ inch thick (only the 1-inch wide size has a 1/4 deep opening). Our design allows installation on virtually all double-thick collars, even those with eyelets in the buckle holes. I’ve had some very nice comments from people who have bought this tag. If your dog is very active and wears a one-inch wide double-thick nylon collar or a leather collar, this is the CollarTag™ to order. These will also work on Rolled Leather Collars, but you will not be able to use the two holes closest to the rolled section to buckle a rolled leather collar, this because the CollarTag™ will cover those two holes.

I have been told by some of our horse owners that these make excellent halter tags for horse identification.

The size CollarTag™ you need is based on the width of the collar your pet wears. No other factor affects CollarTag™ size selection. If you measure the collar width and then select the radio button below that reflects that measurement, you will get a CollarTag™ that fits your pet’s collar every time. We do not have a double-thick CollarTag™ that is correct for collars 1/2″ wide; the 5/8″ wide size will be installed on 1/2 wide collars but the tag will have a slot in it 1/8″ wider than the collar.

Note on size selection:  The only factor that affects CollarTag™ size selection is the width of the collar the tag will be installed on.  If you measure the collar width and then select the radio button that reflects that measurement, you will get a CollarTag™ that fits your pet’s collar every time.